The electronic properties of GaAs are superior to silicon's. It has a higher saturated electron velocity and higher electron mobility, allowing it to function at frequencies in excess of 250 GHz. Also, GaAs devices generate less noise (physics) than silicon devices. These properties have made GaAs circuitry common in mobile phones, communications satellite communications, microwave point-to-point links, and some radar systems.
GaAs devices also require less power than those made from silicon, an important consideration for low-power or high-density applications. This is another reason GaAs is popular in cell phone applications; less power is being fed into the amplifier circuitry as opposed to the resulting signal.
Another advantage of GaAs is that it has a direct bandgap. This means that it can be used to emit light. Silicon has an indirect bandgap, and so is very poor at emitting light. (Nonetheless, recent advances may make silicon LEDs and lasers possible).
The combination of high switching speed and low power consumption makes GaAs seemingly ideal for computer uses, and for some time in the 1980s many thought that it was only a matter of time before the entire market switched off of silicon. The first to attempt this were the supercomputer vendors, with Cray Research, Convex Computer and Alliant Computer Systems all running GaAs projects in order to stay ahead of the ever-improving CMOS microprocessor. The closest to production was the Cray-3, built to one example in the early 1990s, but the effort was so costly the venture failed and the company filed for bankruptcy in 1995.
Silicon has two major advantages over GaAs. First, silicon is cheap. This is for several reasons: silicon's large wafer size (maximum of ~300 mm compared to ~150 mm diameter), high strength allowing for easier processing, and of course the scale of the economy.
The second major advantage is the existence of silicon dioxide—one of the best known insulators of any kind. Silicon dioxide can easily be incorporated into silicon circuits wherever a good insulator is required. GaAs circuits must either use the intrinsic semiconductor itself or silicon nitride; neither comes close to the extremely good properties of silicon dioxide.
Complex layered structures of gallium arsenide in combination with aluminum arsenide (AlAs) or the alloy Aluminum gallium arsenide can be grown using molecular beam epitaxy (MBE). Because GaAs and AlAs have almost the same lattice constant, the layers have very little induced strain, which allows them to be grown almost arbitrarily thick.
See alsosemiconductor, electronics, integrated circuit, semiconductor devices, field effect transistor
==Safety==
The toxicological properties of gallium arsenide have not been thoroughly investigated. However, it is considered highly toxic and carcinogenic.
==external links==
*[http://www.ioffe.ru/SVA/NSM/Semicond/GaAs/index.html Extensive site on the physical properties of Gallium arsenide]
ArsenidesGallium compoundsCompound semiconductors